Improving the Performance of the Caterpillar 793C Haul Truck Against Air Pressure Differences Below Mining Wells and Dumping Points

Haul Truck Performance

Authors

  • Fransye Joni Pasau Universitas Balikpapan
  • Gunawan Universitas Balikpapan
  • Fuad Erfan Rifai Universitas Balikpapan

Keywords:

Engine Rotation, Power, Torque, BMEP, Performance

Abstract

The performance of the haul truck engine that operates from the mining well to the dumping point is important in mining operations. Different operational conditions, such as confined environments, low air circulation, exposure to mining particles, and heavy loads, affect engine performance. To achieve efficiency and productivity in operations, analysis of factors that influence unit performance is important. This research analyzes how to improve engine performance by comparing altitude levels which cause differences in atmospheric pressure, which have an impact on haul truck engine performance. Evaluation of heavy equipment engine performance at wells and dumping points shows differences in power, torque and BMEP. In the well, the engine reaches 2331 hp of power, 6862 lb.ft of torque, and BMEP of 138 kg/cm2 at an engine speed of 1784 rpm. Meanwhile at the dumping point, power is 1718 hp, torque is 4748 lb.ft and BMEP is 95.28 kg/cm2 at an engine speed of 1900 rpm. Analysis of the performance of this unit is an important step in facing operational challenges and improving the overall smoothness of mining operations.

References

A. Halim, E. Saputro, Y. Sukmono, and M. Anhar, “Performance Analysis Engine Caterpillar Model C27 Pasca Rekondisi dengan Pengujian Dynotest,” Serambi Eng., vol. VII, no. 3, pp. 3446–3453, 2022.

B. Rabeta, “Analisis Performa Engine Marchetti Sf 260,” J. Teknol. Kedirgant., vol. 4, no. 2, 2016, doi: 10.35894/jtk.v4i2.315.

Y. Yusuf, N. K. Caturwati, I. Rosyadi, H. Haryadi, and S. Abdullah, “Analisis prestasi mesin mobil diesel turbocharger yang diuji dengan dynamometer,” Tek. J. Sains dan Teknol., vol. 15, no. 2, p. 92, 2019, doi: 10.36055/tjst.v15i2.6815.

Published

2023-03-31

How to Cite

Fransye Joni Pasau, Gunawan, & Fuad Erfan Rifai. (2023). Improving the Performance of the Caterpillar 793C Haul Truck Against Air Pressure Differences Below Mining Wells and Dumping Points: Haul Truck Performance. Jurnal Rekayasa Mesin Dan Inovasi Teknologi, 4(1), 231–234. Retrieved from http://jurnal.ftm.uniba-bpn.ac.id/index.php/REMIT/article/view/58

Issue

Section

Articles