ANALISIS PERBANDINGAN LAJU KEAUSAN KAMPAS REM BELAKANG SEPEDA MOTOR LISTRIK INOVASI KARYA NUSA (IKN) UNIBA
Keywords:
Pacific brake lining, KMJG, wear rate and service life, lifetimeAbstract
The ability of the braking system in motorized vehicles is important because it affects driving safety. Brake lining is a very important component in the vehicle braking system, related to safety factors in driving. The level of wear and tear on the brake pads and the age of use must be considered, as well as the brand and quality when selecting the type of brake lining that will be used for the long term in the future. Everything that is rushed will definitely decrease with use. This research was conducted to test the comparison of brake linings which aims to find the value of the wear rate and also the service life according to the rear brake linings used, namely Pacific and KMJG brands.
This research was conducted at the Laboratory of the University of Balikpapan. The purpose of this study was to test the braking performance of Pacific and KMJG brake pads at speeds of 20, 30 and 40 kilometers per hour. Testing of electric motorcycles with a hand-held pallet on the rear wheel braking system was carried out at a predetermined speed in standby or stand still to see how effectively the brake pedal can stop the bike. The brake pads in the Pacific sample have a wear rate of 0.5286 gr/mm2.sec. This is lower than the liner wear rate in the European sample, which is 0.6875 gr/mm2.sec. The brake pads with the highest wear value are KMJG brake pads with a value of 2.1418 gr/mm2.second.
References
Purkuncoro Eko Aladin, ''Analisis Perbandingan Laju Keausan Kampas Rem Cakram Sepeda Motor" JurusanTeknikMesin, FakultasTeknologi Industri, Institut Teknologi Nasional Malang Jl. Sigura – gura No 2, Malang 65145, Indonesia Email: aladin_smart@yahoo.com
I. E. Putra and J. Agusti, “Analisa Pengaruh Beban Pengereman Dan Variasi Merk Kampas Rem Terhadap Keausan Kampas Rem” J. Mek., vol. 3, no. 2252, pp. 58–66, 2019.
A. Multazam, A. Zainuri, and S. Sujita, “Analisa Pengaruh Variasi Merek Kampas Rem Tromol Dan Kecepatan Sepeda Motor Honda Supra X125 Terhadap Keausan Kampas Rem” Din. Tek. Mesin, vol. 2, no. 2, pp. 100–107, 2012, doi: 10.29303/d.v2i2.101.
Pratama Rizki. P, dan Hajar Ibnu, "Desain Sistem Pengereman Regeneratif Pada Sepeda Listrik Ringkas" 2021. Energi dan Kelistrikan: Jurnal Ilmiah Vol. 13, No. 1, Januari - Juni 2021, P-ISSN 1979-0783, E-ISSN 2655-5042 https://doi.org/10.33322/energi.v13i1.1058
Taufik Ahmad dan Darmanto, "Analisis Keausan Kampas Rem Pada Disc Brake Dengan Variasi Kecepatan" 2018. Momentum, Vol. 14, No. 1, April 2018, Hal. 27-32 ISSN 0216-7395
Zakaria Muhammad, "Analisis Kampas Rem Komposit Dari Karbon Kulit Buah Mahoni dan Abu Layang (Fly Ash) Batu Bara Serta Sifat-Sifat Fisikanya" 2018. Skripsi Program Studi Fisika Universitas Negeri Semarang
P. D. Suiyono, "Perhitungan Keausan Berbasis Fem Pada Sistem Rolling-Sliding Contact" 2016.
S. Azis and M. Zakinura, “Analisa Umur Pakai (Lifetime) Ball Bearing Tipe UCF 4 Bolt Flange Unit Pada Mesin Spin Coating Abrasive Clutch Test di PT XY mengukur ketebalan permukaan Clutch setelah diuji pada mesin Spin Coating Abrasive Clutch Test. Mesin ini dan kualitas hasil penelitian Politek. negeri jakarta, vol. 16, no. 3, pp. 269–276, 2017.
P. I. Purboputro and B. A. Prabowo, “Analisa Pengaruh Serat Rami dan Fiberglass dengan Variasi Butiran Kuningan (Cu-Zn) Mesh 40,50,60 Terhadap Nilai Kekerasan, Keausan, dan Koefisien Gesek Kampas Rem” Media Mesin Maj. Tek. Mesin, vol. 20, no. 2, pp. 32–40, 2019, doi: 10.23917/mesin.v20i2.8533.
B. A. B. Ii, “Gambaran Umum Rem Sepeda Motor,” pp. 8–32, 1902
